{"product_id":"bitfunx-picoboot-rp2040-board-16mb-flash-usb-c-microcontroller-board-for-gamecube","title":"Bitfunx PicoBoot RP2040 Board – 16MB Flash USB-C Microcontroller Board for GameCube","description":"\u003ch2\u003ePicoBoot RP2040 Board for GameCube\u003c\/h2\u003e\n\n\u003cp\u003e\nThe Bitfunx PicoBoot is an RP2040-based microcontroller board designed for \u003cstrong\u003eNintendo GameCube PicoBoot installations\u003c\/strong\u003e and other DIY electronics projects.\n\u003c\/p\u003e\n\n\u003cp\u003e\nFeaturing a dual-core \u003cstrong\u003eARM Cortex-M0+\u003c\/strong\u003e processor, 16MB onboard QSPI Flash memory, USB-C connectivity, and 26 multifunction GPIO pins, the PicoBoot provides a compact and flexible platform for GameCube modding and custom applications.\n\u003c\/p\u003e\n\n\u003cp\u003e\nThe board follows the pin layout of the official Raspberry Pi Pico, making it suitable as a replacement for a Raspberry Pi Pico in compatible projects.\n\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\n\u003cp\u003e\n\u003cstrong\u003eRP2040 Dual-Core Processor:\u003c\/strong\u003e Powered by the RP2040 microcontroller developed by Raspberry Pi, with dual ARM Cortex-M0+ cores running at up to 133 MHz.\n\u003c\/p\u003e\n\n\u003cp\u003e\n\u003cstrong\u003e16MB QSPI Flash:\u003c\/strong\u003e Includes 16MB of onboard QSPI Flash memory for firmware, code, and data storage.\n\u003c\/p\u003e\n\n\u003cp\u003e\n\u003cstrong\u003eRaspberry Pi Pico Compatible Pinout:\u003c\/strong\u003e Uses the same pin layout as the official Raspberry Pi Pico and can replace a Raspberry Pi Pico in compatible applications.\n\u003c\/p\u003e\n\n\u003cp\u003e\n\u003cstrong\u003eUSB-C Interface:\u003c\/strong\u003e Equipped with a USB Type-C interface for programming and connection with modern USB devices.\n\u003c\/p\u003e\n\n\u003cp\u003e\n\u003cstrong\u003e26 Multifunction GPIO Pins:\u003c\/strong\u003e Provides 26 GPIO pins for flexible connections and custom hardware projects.\n\u003c\/p\u003e\n\n\u003cp\u003e\n\u003cstrong\u003eHigh-Current 3.3V Regulation:\u003c\/strong\u003e The onboard TD6810TR voltage regulator provides a 3.3V operating voltage with up to 500mA current capability.\n\u003c\/p\u003e\n\n\u003cp\u003e\n\u003cstrong\u003eReset \u0026amp; Boot Buttons:\u003c\/strong\u003e Built-in Reset and Boot buttons provide convenient operation during development and programming.\n\u003c\/p\u003e\n\n\u003cp\u003e\n\u003cstrong\u003eLow-Power Operation:\u003c\/strong\u003e Supports low-power sleep and dormant modes for power-sensitive applications.\n\u003c\/p\u003e\n\n\u003cp\u003e\n\u003cstrong\u003eCastellated Edges:\u003c\/strong\u003e Castellated module edges allow the board to be soldered directly onto compatible carrier boards.\n\u003c\/p\u003e\n\n\u003cp\u003e\n\u003cstrong\u003eDrag-and-Drop Programming:\u003c\/strong\u003e Supports USB mass-storage programming for convenient firmware installation.\n\u003c\/p\u003e\n\n\u003ch2\u003eHardware Specifications\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMicrocontroller:\u003c\/strong\u003e RP2040\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProcessor:\u003c\/strong\u003e Dual-core ARM Cortex-M0+\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Clock Frequency:\u003c\/strong\u003e Up to 133 MHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSRAM:\u003c\/strong\u003e 264KB\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlash Memory:\u003c\/strong\u003e 16MB QSPI Flash\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGPIO:\u003c\/strong\u003e 26 multifunction GPIO pins\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUSB:\u003c\/strong\u003e USB Type-C\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOperating Voltage:\u003c\/strong\u003e 3.3V\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVoltage Regulator:\u003c\/strong\u003e TD6810TR\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProgramming \u0026amp; Interfaces\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e2 × SPI\u003c\/li\u003e\n  \u003cli\u003e2 × I2C\u003c\/li\u003e\n  \u003cli\u003e2 × UART\u003c\/li\u003e\n  \u003cli\u003e3 × 12-bit ADC\u003c\/li\u003e\n  \u003cli\u003e16 × controllable PWM channels\u003c\/li\u003e\n  \u003cli\u003e8 × Programmable I\/O (PIO) state machines\u003c\/li\u003e\n  \u003cli\u003eOn-chip clock and timer\u003c\/li\u003e\n  \u003cli\u003eOn-chip temperature sensor\u003c\/li\u003e\n  \u003cli\u003eHardware-accelerated floating-point libraries\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePicoBoot for GameCube\u003c\/h2\u003e\n\n\u003cp\u003e\nThe PicoBoot is designed to be used with compatible \u003cstrong\u003eNintendo GameCube\u003c\/strong\u003e PicoBoot installations. It provides an RP2040-based alternative to the Raspberry Pi Pico for GameCube modding projects.\n\u003c\/p\u003e\n\n\u003cp\u003e\nPlease make sure your GameCube installation and firmware are compatible with this board before purchasing.\n\u003c\/p\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMicrocontroller:\u003c\/strong\u003e RP2040\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGameCube Mod:\u003c\/strong\u003e PicoBoot\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePinout:\u003c\/strong\u003e Raspberry Pi Pico compatible\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUSB:\u003c\/strong\u003e USB Type-C\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFirmware:\u003c\/strong\u003e Compatible RP2040 firmware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eOpen Source\u003c\/h2\u003e\n\n\u003cp\u003e\nFor more information about the Bitfunx PicoBoot project, please visit:\n\u003c\/p\u003e\n\n\u003cp\u003e\n\u003ca href=\"https:\/\/github.com\/RetroScaler\/RP2040-PICO-BOOT\" target=\"_blank\" rel=\"noopener\"\u003e\nhttps:\/\/github.com\/RetroScaler\/RP2040-PICO-BOOT\n\u003c\/a\u003e\n\u003c\/p\u003e\n\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e1 × Bitfunx PicoBoot RP2040 Board\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eImportant Notes\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eThis is an RP2040-based development board intended for PicoBoot and other compatible projects.\u003c\/li\u003e\n  \u003cli\u003ePlease verify your installation method and firmware compatibility before purchasing.\u003c\/li\u003e\n  \u003cli\u003eAdditional soldering and hardware modification may be required for GameCube PicoBoot installation.\u003c\/li\u003e\n  \u003cli\u003eUSB Type-C cable is required for USB connection and programming if not included in the package.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bitfunx","offers":[{"title":"Default Title","offer_id":47726980694100,"sku":"XLL-PICO-BOOT-Board-PP","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/7094\/9716\/files\/picoboot_1.jpg?v=1790242468","url":"https:\/\/www.bitfunxshop.com\/products\/bitfunx-picoboot-rp2040-board-16mb-flash-usb-c-microcontroller-board-for-gamecube","provider":"Bitfunx Official Store","version":"1.0","type":"link"}